2014+ Tundra Sony 8100 Installation Guide
Tundra Sony 8000

By: Cliff John, Trail Grid Pro

This installation guide is intended to be used to assist you during the installation of your

Sony 8100 Tundra Plug and Play Bundle from Trail Grid Pro.

Installing your bundle

1. The Body – Consists of the head unit, silver dash kit and our custom wiring harness.

  • Make all your vehicle connections as noted in the document below. We’ve drawn a red box around the vehicle connectors you’ll be using for your installation, which are 2, 4 & 5. Vehicle connectors 1 & 3 will not be used.
  • All the plugs are keyed plugs, which means they only fit their match on the Toyota side. All you’re doing is matching plugs – it may look like a lot of wires but it’s simple.
  • Small Yellow Clips: Please use the small yellow tab clips we supply in the bundle to attach to the tabs on the back of our dash kit. They are more robust than the factory clips and hold our bundle in place better when installed.
2014+ Tundra(RP4.2 TY11)

You will be using vehicle connectors 2, 4 & 5

  • Next, secure the backup camera connection harness labeled CAM-TY12 (connect the female side of the CAM TY12 to the factory video harness), Sirius/XM satellite connection (if applicable), AM/FM antenna connection, Sony supplied microphone and the USB retention cable connection.
  • DO NOT POWER ON YOUR HEAD-UNIT BEFORE ALL CONNECTIONS ARE MADE. This will cause an error when the PAC module is trying to calibrate to your vehicle.

More Install Tips Regarding The Components Of Your Sony Bundle


Ask A Question

keep climbing
Shopping Cart