2014-2019 4Runner Sony 6000 Installation Guide
4Runner 4000

By: Cliff John, Trail Grid Pro

This installation guide is intended to be used to assist you during the installation of your

2014-2019 Sony 6000 4Runner Plug and Play Bundle from Trail Grid Pro.

Installation Videos

Sony Bundle Installation Video

4Runner Microphone Install

Installing your bundle

1. The Body – Consists of the head unit and our custom wiring harness.

You’re going to install this first.

  • Make all your vehicle connections as noted in the document below. Shown below are the vehicle connectors you’ll be using for your installation, which are the 4 factory looking connectors from the Maestro RR module.
  • All the plugs are keyed plugs, which means they only fit their match on the Toyota side. All you’re doing is matching plugs – it may look like a lot of wires but it’s simple.

You Will Be Connecting:

4 Connectors From The Maestro Harness

USB Retention Adapter

Factory Navigation Adapter

Sony Microphone

AM/FM Radio Adapter

Sirius XM Tuner (If Selected)

HDMI Output (HDMI Cable Not Included)

  • DO NOT POWER ON YOUR HEAD-UNIT BEFORE ALL CONNECTIONS ARE MADE. This will cause an error when the Maestro module is trying to calibrate to your vehicle.

More Install Tips Regarding The Components Of Your Sony Bundle

2. The Dash Kit - Your New Silver or Charcoal Metra 4Runner Dash Cover. 

You’re going to install this second.

  • Transfer your vents, trim pieces, and install the hazard button trim to the dash kit just like in the video below.
  • Small yellow clips: Please use the small yellow tab clips provided with our bundle to attach to the four tabs on the back of our dash kit. They are more robust than the factory clips and hold our bundle more securely.
  • Make sure to connect the hazard button wire before installing the dash kit into your dash, over the body of the bundle.

Ask A Question

keep climbing
Shopping Cart