Skip to product information
1 of 8

Westcott Designs Pre-Load Collar Lift Kit | '22 - '24 Tundra

Westcott Designs Pre-Load Collar Lift Kit | '22 - '24 Tundra

Regular price $425.95
Regular price Sale price $425.95
Sale Sold out
Shipping calculated at checkout.

Free Lower 48 Shipping.
Raw Kits and Black Anodized Kits will ship in approximately 6-8 weeks.

FITS: 2022-2023 Toyota Tundra

This kit provides the following lifts:

  • SR: 3” (front lift) and 1.0” (rear lift)
  • SR5: 3” (front lift) and 1.0” (rear lift)
  • Limited: 3” (front lift) and 1.0” (rear lift)
  • 1794: 3” (front lift) and 1.0” (rear lift)
  • TRD Off-Road: 3” (front lift) and 1.0” (rear lift)
  • AVS/Air Ride: 2” (front lift) and 7/8” (rear lift)

Please note that this item is non-refundable once installed.

View full details

Fast US Standard Shipping &
Easy International Shipping

60-Day Returns

TG Pro
Satisfaction Promise

Trail Grid Pro Tested

2022 Toyota Tundra Lift Kit

Westcott Designs Pre-Load Collar Lift Kit | '22 - '23 Tundra

2022 Toyota Tundra Lift Kit Install

Westcott Designs Pre-Load Collar Lift Kit | '22 - '23 Tundra

Installing Rear AVS Arms

Westcott Designs Pre-Load Collar Lift Kit | '22 - '23 Tundra


VERIFIED TO FIT 2022 MODELS

Westcott Designs preload collar lift kit for the all-new 2022 Toyota Tundra!

This kit features CNC machined lower preload collars, top shim plates, rear billet lift pucks and hard anodized black for a strong, durable finish.

This kit gives you a full 3” of lift in the front and 1” in the rear using your factory shocks and springs and includes complete hardware for an easy install.

This is NOT your traditional spacer lift kit. You retain your factory ride quality, factory suspension geometry and still are able to align the vehicle to factory specs after install.

It does NOT require new UCA’s, and you can run up to a 35” tire without a Body Mount Chop (37” tires are compatible if used with the correct wheel size & offset with minor trimming).

This kit provides the following lifts:

  • 2022 Tundra: 3.0” (front lift) and 1.00” (rear lift)
SAEJ2492 Warning: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than that of factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or roll-over during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident in your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner’s manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.
 

Please read Instructions thoroughly and completely before beginning installation. Installation by a certified mechanic is recommended. Westcott Designs & Trail Grid Pro are NOT responsible for any damage or failure resulting from improper installation.

Weight 15 lbs
Dimensions 12 × 12 × 6 in
Toyota Model Tundra
Toyota Year 2022