Toyota Land Cruiser 250 Series (2024+) DRIFTR Roof Rack

Backwoods DRIFTR Roof Rack for 2024+ Toyota Land Cruiser 250

Expand the cargo capacity and versatility of your 2024+ Toyota Land Cruiser 250 with the Backwoods Adventure Mods DRIFTR Roof Rack. Designed specifically for the LC250, the DRIFTR combines lightweight aluminum construction, a low-profile design, modular accessory mounting, and integrated lighting provisions into a rugged roof rack built for overlanding, camping, and off-road adventures.

Constructed from 1/4" aluminum and featuring eight adjustable extrusions, the DRIFTR gives you a flexible platform for carrying rooftop tents, recovery gear, storage boxes, fuel cans, off-road equipment, and more—all while maintaining a clean profile that complements the Land Cruiser's factory body lines.

Low-Profile, Lightweight & Built for Adventure

A roof rack should add capability without adding unnecessary bulk.

The DRIFTR Roof Rack uses thick 1/4" aluminum construction to provide excellent strength while keeping weight lower than comparable steel rack systems. Its low-profile design keeps cargo close to the roof and creates a streamlined appearance that looks at home on the Land Cruiser 250.

It's equally suited for a daily-driven LC250, weekend trail rig, or fully equipped overland build.

Modular Accessory Mounting

The DRIFTR is designed around customization.

Triple-slotted 1x3 extrusions provide multiple mounting points across the rack, allowing you to position accessories where they work best for your particular setup.

Pre-drilled holes and slots along the side rails allow the extrusions to be repositioned throughout the rack, while included roll-in T-nut hardware makes adding and adjusting compatible accessories straightforward.

Use the rack to configure your Land Cruiser for:

• Rooftop tents
• Cargo and storage boxes
• Recovery equipment
• Traction boards
• Fuel and water containers
• Off-road jacks
• Awnings
• Auxiliary lighting
• Camping equipment
• Other compatible adventure gear

Eight Included Crossbar Extrusions

The rack includes eight aluminum extrusions, providing a versatile foundation for mounting cargo and accessories.

Seven can be utilized throughout the primary cargo area, while one extrusion is used to reinforce the front fairing.

Additional extrusions are available separately in pairs when your particular setup requires additional mounting locations or support.

Integrated Front & Rear Lighting Options

Build auxiliary lighting directly into your roof rack for a cleaner installation.

The front and rear fairings feature 1/4" and 3/8" slotted cutouts for mounting compatible lights. Rear chase-light pockets feature a tabbed design that allows them to be opened when needed while maintaining a clean appearance when they're not being used.

The rear light pockets are designed to accommodate Baja Designs S1 and S2 lights or other similarly sized lights.

Lighting is sold separately.

Adjustable Front Fairing

An adjustable front fairing allows you to fine-tune the rack's setup on your Land Cruiser.

The fairing integrates into the low-profile design while also incorporating provisions for auxiliary lighting and an additional extrusion for reinforcement.

Built-In Side Rail Handles

Integrated handle cutouts in the side rails add another layer of everyday functionality.

They provide convenient handholds when accessing equipment on top of your Land Cruiser, helping make it easier to load, unload, and organize roof-mounted gear.

Sunroof Compatible

The DRIFTR Roof Rack is designed specifically around the 2024+ Toyota Land Cruiser 250 and is compatible with the factory sunroof.

This allows you to add the cargo capacity and functionality of a full roof rack without giving up one of your Land Cruiser's factory features.

No-Drill Installation

Adding a full-length roof rack doesn't require drilling holes into your Land Cruiser.

The DRIFTR features a bolt-on, no-drill installation using six rubber mounting blocks and two brackets positioned along the weatherstripping.

Sealant is included for installation around the mounting bolts.

The rack installs in individual sections, making the process more manageable without requiring the entire rack to be lifted onto the vehicle as one large assembled unit.

Built to Carry Serious Gear

The DRIFTR Roof Rack is rated for:

Dynamic Weight Capacity: 300 lbs.
Static Weight Capacity: 700 lbs.*

That provides the capacity needed for popular overland equipment such as rooftop tents, storage boxes, fuel cans, recovery equipment, and off-road gear.

When parked, the static capacity also makes the rack suitable for rooftop tent setups supporting gear and occupants.

Always consider Toyota's factory roof-load specifications, vehicle configuration, cargo distribution, and driving conditions when determining how much weight to carry.

Key Features

• Designed specifically for 2024+ Toyota Land Cruiser 250
• Low-profile DRIFTR roof rack design
• Made in the USA
• Heavy-duty 1/4" aluminum construction
• Lightweight alternative to comparable steel racks
• Modular and highly configurable design
• Eight extrusions included
• 1x3 triple-slotted extrusions
• Roll-in T-nut accessory mounting hardware included
• Extrusions can be positioned throughout the rack
• Pre-drilled side rail holes and slots
• Adjustable front fairing
• Side rail handle cutouts
• Front and rear auxiliary lighting provisions
• 1/4" and 3/8" light-mounting slots
• Integrated rear chase-light pockets
• Rear pockets compatible with Baja Designs S1, S2, and similarly sized lights
• Compatible with factory sunroof
• No drilling required
• Bolt-on installation
• Sealant included for mounting points
• 300 lb. dynamic weight rating*
• 700 lb. static weight rating*
• Black powder coat included
• Lifetime warranty
• Free shipping within the lower 48 states

Fitment

Vehicle: Toyota Land Cruiser
Generation: Land Cruiser 250 / LC250
Model Years: 2024+
Factory Sunroof: Compatible
Installation: Bolt-on, no drilling required

Specifications

Construction: 1/4" aluminum
Crossbars/Extrusions: 8 included
Extrusion Design: 1x3 triple-slotted
Dynamic Weight Rating: 300 lbs.*
Static Weight Rating: 700 lbs.*
Installation: No-drill, bolt-on
Mounting System: 6 rubber blocks and 2 weatherstripping-mounted brackets
Finish: Black powder coat
Manufacturing: Made in the USA

Optional Accessories

Customize your DRIFTR Roof Rack with available accessories, including:

• HD Awning Mounts
• Universal Accessory Deck Panels
• Dogbone Traction Board Mount
• Agency 6 Grab Handles
• Additional DRIFTR Rack Extrusions

Optional accessories are sold separately.

What's Included

• Backwoods DRIFTR Roof Rack for Toyota Land Cruiser 250
• (8) 1x3 Triple-Slotted Extrusions
• Roll-In T-Nut Accessory Hardware
• Adjustable Front Fairing
• Mounting Hardware
• (6) Rubber Mounting Blocks
• (2) Mounting Brackets
• Installation Sealant
• Black Powder-Coated Finish

Please Note: Rooftop tents, lights, traction boards, awnings, storage boxes, and other accessories shown in product photos are not included unless otherwise specified.

Shipping

The Backwoods DRIFTR Roof Rack includes free shipping within the lower 48 United States, providing an additional $100 in savings with no unexpected shipping charge at checkout.