Cali Raised Rear Hatch Ladder | '10 - '24 4Runner

Cali Raised Rear Hatch Ladder for 2010–2024 Toyota 4Runner

Add convenient roof access and extra gear-carrying capability to your 2010–2024 Toyota 4Runner with this heavy-duty 5th Gen rear hatch ladder. Designed for overland and off-road use, it provides a secure step for accessing roof racks, rooftop tents, cargo boxes, camping equipment, recovery gear, MAXTRAX, traction boards, and more.

The ladder combines steel mounting plates with lightweight aluminum rails and steps for a strong, durable design without unnecessary weight. A black powder-coated finish gives it a clean, rugged appearance that complements any 4Runner build.

Built for Roof Access & Overland Gear

Unlike clamp-style ladders, this ladder uses a drilled mounting system for a stronger, more secure installation. Double-sided adhesive tape is also used to help secure the ladder and protect the mounting area. Installation takes approximately 1–2 hours, and all required mounting hardware is included.

For additional storage, the ladder supports up to three optional MOLLE panels. These panels provide additional mounting space for RotopaX, recovery equipment, and other MOLLE-compatible accessories. Each panel also features foot holes that can be used as an additional step surface.

Key Features

• Designed for 2010–2024 Toyota 4Runner, 5th Gen
• Compatible with all 5th Gen 4Runner trim levels
• Provides easier access to roof racks, rooftop tents, cargo boxes, camping gear, and recovery equipment
• Compatible with factory roof rails and aftermarket roof rack setups
• 16-gauge steel top mounting plate
• 10-gauge steel bottom mount
• 3/16-inch aluminum side rails and steps
• Durable black powder-coated finish
• Requires drilling for a secure installation
• Double-sided adhesive tape helps secure the ladder
• Includes all required mounting hardware
• Estimated installation time: 1–2 hours
• 250 lb. static weight capacity
• Base ladder weighs approximately 25 lbs.
• Supports up to 3 optional MOLLE panels
• Each MOLLE panel adds approximately 1.5 lbs.
• MOLLE panels provide additional mounting space for RotopaX and other compatible gear
• MOLLE panels include foot holes that can function as an additional step surface
• Designed to accommodate additional recovery and overland equipment
• Does not interfere with hatch struts, rear window operation, rear camera visibility, or rearview mirror visibility
• 100% made in the USA

Fitment

2010–2024 Toyota 4Runner, 5th Gen

Compatible with:

• SR5
• SR5 Premium
• Trail
• Trail Premium
• TRD Sport
• TRD Off-Road
• TRD Off-Road Premium
• TRD Pro
• Venture Special Edition
• Limited
• Nightshade
• Other 5th Gen 4Runner trim levels

Make: Toyota
Model: 4Runner
Generation: 5th Gen
Years: 2010–2024

Designed to work with factory roof rails and aftermarket roof rack systems.

Installation & Specifications

• Installation: Drilling required
• Mounting: Drilled mounting system with double-sided adhesive support
• Install difficulty: Moderate
• Estimated install time: 1–2 hours
• Top mounting plate: 16-gauge steel
• Bottom mount: 10-gauge steel
• Side rails: 3/16-inch aluminum
• Steps: 3/16-inch aluminum
• Finish: Black powder coat
• Base ladder weight: Approximately 25 lbs.
• MOLLE panel weight: Approximately 1.5 lbs. each
• Maximum MOLLE panels: 3
• Weight with 1 panel: Approximately 26.5 lbs.
• Weight with 2 panels: Approximately 28 lbs.
• Weight with 3 panels: Approximately 29.5 lbs.
• Static weight capacity: 250 lbs.
• Country of origin: 100% made in the USA

What's Included

• Rear hatch ladder
• Top mounting plate
• Bottom mount
• Aluminum side rails
• Aluminum steps
• Mounting hardware
• Double-sided adhesive tape

MOLLE panels and accessory mounts are sold separately.

Frequently Asked Questions

Q: Will this ladder fit my 2010–2024 Toyota 4Runner?
A: Yes. This rear hatch ladder is designed specifically for 2010–2024 Toyota 4Runner 5th Gen models.

Q: Is it compatible with all 5th Gen 4Runner trims?
A: Yes. The ladder is designed to fit all 5th Gen 4Runner trim levels, including SR5, SR5 Premium, Trail, Trail Premium, TRD Sport, TRD Off-Road, TRD Off-Road Premium, TRD Pro, Venture Special Edition, Limited, Nightshade, and other 5th Gen trims.

Q: Does installation require drilling?
A: Yes. Drilling is required for installation. This mounting method provides a stronger and more stable setup compared to clamp-style ladder designs.

Q: Is adhesive included?
A: Yes. Double-sided adhesive tape is included and helps secure the ladder during installation.

Q: How long does installation take?
A: Installation typically takes approximately 1–2 hours, depending on experience and tools.

Q: Can I use the ladder to access my roof rack or rooftop tent?
A: Yes. The ladder provides easier access to roof racks, rooftop tents, cargo boxes, camping equipment, recovery gear, MAXTRAX, traction boards, and other roof-mounted equipment.

Q: Will it work with factory roof rails and aftermarket roof racks?
A: Yes. The ladder is designed to work with both factory roof rails and aftermarket roof rack setups.

Q: Will the ladder interfere with my rear hatch or window?
A: No. The ladder is designed not to interfere with the hatch struts, rear window operation, rear camera visibility, or rearview mirror visibility.

Q: Can I add MOLLE panels?
A: Yes. The ladder supports up to three optional MOLLE panels. The panels provide additional mounting space for RotopaX, recovery equipment, and other MOLLE-compatible accessories.

Q: Can the MOLLE panels be used as steps?
A: Yes. The MOLLE panels feature foot holes that can be used as an additional step surface.

Q: What materials is the ladder made from?
A: The ladder features a 16-gauge steel top mounting plate, 10-gauge steel bottom mount, and 3/16-inch aluminum side rails and steps.

Q: How much does the ladder weigh?
A: The base ladder weighs approximately 25 lbs. Each MOLLE panel adds approximately 1.5 lbs., with support for up to three panels.

Q: What is the ladder's weight capacity?
A: The ladder has a 250 lb. static weight capacity.

Q: Where is the ladder made?
A: The ladder is 100% made in the USA.