Morimoto H11A XB HID Bulbs | Pair

Fitment & Product Features

Choose the color temperature for your compatible HID system with a matched pair of Morimoto H11A XB HID bulbs. Quartz-glass capsules, AMP connections, and a precision-aligned frame support consistent light-source positioning in a properly matched installation.

Fitment & Required Equipment

• Exact bulb configuration: H11A bulb configuration. Confirm the lamp base, connector, capsule clearance, and any required bulb orientation.
• Equipment required: HID bulbs do not connect directly to stock wiring. Compatible ballasts and the appropriate wiring harness are required and are not included.
• 4Runner guide scope: Listed in Morimoto’s 2020 4Runner buyer guide; this does not establish fitment for every 4Runner year, lamp, or lighting package.
• USA application restriction: Morimoto identifies these bulbs as not DOT/FMVSS108 compliant for public-road headlight use in the USA.

Fitment & Required Equipment (continued)

• Manufacturer use notes: The source states USA fog-light use and off-road forward-lighting applications. International requirements vary; check the requirements for your intended installation.

Design & Lighting Features

• Capsule construction: Philips quartz glass with an APL-USA capsule and German-sourced halide salts.
• Alignment: Morimoto Symmetry-Structure frame supports capsule alignment.
• Ballast compatibility: Manufacturer specifies compatible AMP-output HID ballasts and 35–55W operation.
• Color selection: Choose the listed color temperature; each option contains two bulbs.

Specifications & Included Components

Review the bulb specifications, exact color options, and included components before choosing your configuration.

Technical Specifications

• Bulb Size: H11A
• Intensity: 2,800-3,500lm (est.)
• Power: 35-55w
• 55w Ballasts: +20% lm, -1000K Color (est.)

Technical Specifications (continued)

• Rated Lifespan: 2,500hrs (3-5yrs)

Included Components

• Bulbs: 2x (One Pair) Morimoto H11A XB HID Bulbs
• Wiring: Housing Pass-Through Cables
• NOTE: HID bulbs by themselves do not connect directly to the stock wiring.

Manufacturer References

• Source SKU: B-BLB-MM-H11A-MM
• 4000K: MM.N.033 — one pair
• 3000K: MM.N.031 — one pair
• 5000K: MM.N.034 — one pair

Manufacturer References (continued)

• 6000K: MM.N.035 — one pair

Warranty

• Manufacturer warranty: This Morimoto product includes a 2 Year limited warranty, serviced and supported by the Morimoto team in Atlanta, GA. This warranty does not cover modifications, alterations, or misuse. In the event of any issues upon installation, please document it via photo/video and contact us prior to removing the light(s). This warranty is only valid if the item is purchased from an Authorized Dealer.

Installation & Resources

Plan the installation around the intended lamp, electrical system, and selected bulb configuration.

Preparation & Installation Notes

• Before installation: Confirm the exact bulb configuration and compatible AMP-output ballast, harness, and housing.
• What is not included: Ballasts, relay harnesses, anti-flicker modules, and dielectric grease are separate accessories.
• Electrical connection: Do not connect these HID bulbs directly to stock vehicle wiring.
• Application restriction: Do not install as public-road replacement headlight bulbs in the USA.

Preparation & Installation Notes (continued)

• Manufacturer instructions: Use the manufacturer’s HID bulb instructions for the selected bulb and electrical system.
• Professional installation: These notes are a preparation overview, not a vehicle-specific procedure. Use a qualified installer if the electrical requirements are unclear.

Manufacturer Installation Guide

Manufacturer installation guide