Morimoto H11 HD Relay Harness | HID Lighting
Morimoto H11 HD Relay Harness | HID Lighting
Couldn't load pickup availability
Fast US Standard Shipping &
Easy International Shipping
30-Day Returns
TG Pro
Satisfaction Promise
Trail Grid Pro Tested
- Details
- Fitment & Features
- Specifications & Components
- Installation
Morimoto H11 HD Relay Harness | HID Lighting
Supply compatible HID ballasts directly from the battery with the Morimoto H11 HD Relay Harness. Separate relays for each side and an inline fuse support a neatly routed HID wiring installation.
Installation Resource: Manufacturer installation guide
Fitment & Requirements
- STOCK BULB SIZE: H11
- HID SYSTEMS: Low Beams, High Beams, or Fog Lights
- BI-XENON PROJECTORS?: You'll need High Beam Splitters
- PWM PULSING SIGNAL?: You'll need a Capacitor Link
- CANBUS SYSTEM?: Use Standalone Canbus or the Mopar Spec harnesses
- Equipment-dependent fitment: Match the input connector and ballast outputs. This harness is not a vehicle-specific complete lighting kit.
Key Features
- Direct battery supply: Powers compatible HID ballasts through a fused battery connection.
- Independent relays: A separate relay serves each side.
- Protected wiring: Sealed connections and abrasion-resistant sleeving support a tidy installation.
What’s Included
- Harness: 1x HD Relay Harness
- Input Adapter: 1x H11/H8/H9 Harness Input Adapter
- Note: One harness controls both headlights
Technical Specifications
- Input: 1x H11 Male
- Output: 2x 9006 Female
- 12V Power: 1x Nickel-Plated Ring Terminal
- Fuse: Inline 20A
Product Identification
- Source SKU: B-WIR-HDH11-MM
- Manufacturer component reference: 1 x H40
Manufacturer Warranty
This Morimoto product includes a 2 Year limited warranty, serviced and supported by the Morimoto team in Atlanta, GA. This warranty does not cover modifications, alterations, or misuse. In the event of any issues upon installation, please document it via photo/video and contact us prior to removing the light(s). This warranty is only valid if the item is purchased from an Authorized Dealer.
Installation Overview
- System requirements: Use compatible HID ballasts and the correct bulb/input connection for your system.
- Additional components: Bi-xenon projector setups need high-beam splitters; PWM-pulsed signals may require a capacitor link. CANBUS systems may require a different or additional compatible harness.
- Instructions: Follow the manufacturer’s HD relay-harness diagram and installation instructions.
- Representative images: Manufacturer gallery images may show a representative harness. Use the listed input/output connectors to match this configuration.
- Professional installation: These notes are an overview, not a substitute for the manufacturer’s instructions. Use a qualified installer if the wiring or application requirements are unclear.