Skip to product information
1 of 3

Westcott Designs Pre-Load Collar Lift Kit | '16 - '23 Tacoma (TRD Off Road)

Westcott Designs Pre-Load Collar Lift Kit | '16 - '23 Tacoma (TRD Off Road)

Regular price $399.95
Regular price Sale price $399.95
Sale Sold out
Shipping calculated at checkout.

Free Lower 48 Shipping.
Raw Kits and Black Anodized Kits will ship in approximately 6-8 weeks.

FITS: 2016-2023 Toyota Tacoma TRD Off-Road

This kit provides the following lifts:

  • 3.0” (front lift) and 1.0” (rear lift)

Please note that this item is non-refundable once installed.

View full details

Fast US Standard Shipping &
Easy International Shipping

60-Day Returns

TG Pro
Satisfaction Promise

Trail Grid Pro Tested

VERIFIED TO FIT 2023 MODELS

Westcott Designs 2016 – 2023 Tacoma TRD Off-Road preload collar lift kit.

This kit is designed for the 2016-23’ Tacoma TRD Off-Road with the yellow body 4600 series Bilstein shocks from the factory.

It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and 1” in the rear.

After install your Tacoma will sit level front to rear and you can run the popular 33” tall tire (285/70R17).

It features our billet preload collars for the front and our billet rear lift block with hardware for the rear. This kit uses the preload in your spring to give you the lift that you are after. You retain your factory ride quality, keep your factory suspension geometry and the ability to align it to spec after install.

This kit provides the following lift:

  • 2016-23′ Tacoma TRD Off Road: 3” (front lift) and 1″ (rear lift)
SAEJ2492 Warning: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than that of factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or roll-over during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner’s manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.
 

Please read Instructions thoroughly and completely before beginning installation. Installation by a certified mechanic is recommended. Westcott Designs & Trail Grid Pro are NOT responsible for any damage or failure resulting from improper installation.

Weight 15 lbs
Dimensions 12 × 10 × 8 in
Toyota Model Tacoma
Toyota Year 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023