Westcott Designs Pre-Load Collar Lift Kit | ’10 – ’22 4Runner (Non-TRD Pro)

$399.95

Free Shipping. Raw Kits ship in 1-2 weeks. Anodized Kits ship in 2-3 weeks.

FITS:  2010-2022 Toyota 4Runner

  • SR5: 3” (front lift) and 1.25” (rear lift)
  • TRD Off Road: 3” (front lift) and 1.25” (rear lift)
  • Trail Edition: 3” (front lift) and 1.25” (rear lift)
  • Venture: 3” (front lift) and 1.25” (rear lift)
  • TRD Off Road Premium: 3” (front lift) and 1.25” (rear lift)

SKU: 4RUN-WC-COLLAR-LIFT(10-22) Category: Tags: , , , , , , , , , , , , , ,

VERIFIED TO FIT 2022 MODELS

Westcott Designs Pre-load Collar Lift Kits are specifically designed for the 2010-2022 4Runner:

  • SR5 / SR5 Premium
  • TRD Off Road / Off Road Premium
  • Trail Edition
  • Venture

The kit gives you 3 inches of lift in the front without the need of a replacement Upper Control Arm (UCA) and gives you 1.25 inches of lift in the rear.

After install your 4Runner will sit level front to rear and you can run the popular 33” tall tire (285/70R17).

It features billet preload collars for the front and billet rear lift block with hardware for the rear.

This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install.

Made in the USA.

SAEJ2492 Warning: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than that of factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or roll-over during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner’s manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.
 

Please read Instructions thoroughly and completely before beginning installation. Installation by a certified mechanic is recommended. Westcott Designs & Trail Grid Pro are NOT responsible for any damage or failure resulting from improper installation.

Ask A Question

Weight 15 lbs
Dimensions 12 × 10 × 8 in
Toyota Model

4Runner

Toyota Year

2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022

Shopping Cart