2007-2013 Tundra Sony 8100 Installation Guide | Non-Amplified/Backup Camera In Head Unit
Toyota Tundra Sony 8100 Bundle

By: Cliff John, Trail Grid Pro

This installation guide is intended to be used to assist you during the installation of your

Sony 8100 Tundra Plug and Play Bundle from Trail Grid Pro.

Sony Installation Video

Installing your bundle

1. The Body – Consists of the head unit, matte or gloss black dash kit and our custom wiring harness.

  • Make all your vehicle connections as noted in the document below. We’ve drawn a red box around the vehicle connectors you’ll be using for your installation, which are 3, 4 & 5. Vehicle connectors 1 & 2 will not be used.
  • All the plugs are keyed plugs, which means they only fit their match on the Toyota side. All you’re doing is matching plugs – it may look like a lot of wires but it’s simple.
  • Retaining Clips: Transfer the 3 clips from the top of your factory dash kit to your new Metra dash kit. These will be needed to secure your new bundle.3
RP4.2-TY11 2007-2013 Tundra Non-Amp,Backup Cam

You will be using vehicle connectors 3, 4 & 5

  • Next, secure the Sirius/XM satellite connection (if applicable), AM/FM antenna connection, Sony supplied microphone and the USB/AUX port (AXUSB35-SKT)
  • DO NOT POWER ON YOUR HEAD-UNIT BEFORE ALL CONNECTIONS ARE MADE. This will cause an error when the PAC module is trying to calibrate to your vehicle.

More Install Tips Regarding The Components Of Your Sony Bundle

Troubleshooting

Ask A Question

keep climbing
Shopping Cart